-
3 In 1 Integrated Screw Air Compressor Compact Unit With Screw Air Compressor, Air Dryer And Air Tank
By integrating the screw air compressor, air dryer, precision filter, cabin and the tank, the integrated screw air compressor looks compacted, nice and practice. Through the working of inside air dryer and air filters, the output air is dry and clean which can help the air tools/production line run properly and safely. This model can offer high efficiency, small setup space and fast working startup.
-
Oil Injection Stationary Rotary Screw Air Compressor with IP54 Motor German Air End
The rotary screw air compressor is popular in factories, plants, or any manufacturing facility due to the cycle on which it runs. Whereas other types of air compressors can only work for on/off cycles, the rotary screw run non-stop around the clock. TWith a 100% duty cycle, rotary screw air compressors should not be shut off and started back up on a recurrent basis. As long as a rotary screw compressor is sized correctly, its efficiency is superior to most other air compressors. The best models of rotary screw compressor help factories maximize efficiency across the chain of production.
-
High Efficiency Permanent Magnet Variable Frequency Screw Air Compressor with Low Noise
The permanent magnet variable frequency compression air compressors are recognized as the most energy-efficient air compressor in the world. A permanent magnet motor is installed and makes the compressor to save 5%-12% more energy than ordinary three-phase asynchronous motor. The motor can maintain a high efficiency even under low speed, so that the compressors can save 32.7% of energy on an average.
-
Energy-Saving Two-stage Compression Screw Air Compressors with Low Speed
Applying the perfect match of Rare-earth permanent magnetic motor, inverter and coupling transmission, the double-stage end can be driven with highest efficient. The working life of the double stage is much longer than regular model due to the lower RPM, besides the power saving is more obvious by above 20%. With two screw rotors of different sizes, the reasonable pressure distribution can be realized to reduce the compression ratio of each compression. The low compression ratio reduces the internal leakage, increasing the volumetric efficiency, and greatly reduces the bearing load, extending the service life of main machine.
